| Materials, Metallurgy, Chemical and Environmental Engineering |
| Effects of minor Zn content on microstructure and corrosion properties of Al-Mg alloy |
ZHAO Jing-wei(趙經緯), LUO Bing-hui(羅兵輝), HE Ke-jian(何克堅), BAI Zhen-hai(柏振海), LI Bin(李彬), CHEN Wei(陳維) |
3051 |
| Properties of CNTs/MoSi2 composites prepared by spark plasma sintering |
ZHANG Yong(張勇), ZHANG Hou-an(張厚安), WU He-jian(吳和尖), GU Si-yong(古思勇), CHEN Ying(陳瑩) |
3060 |
| Constitutive modeling of dynamic recrystallization behavior and processing map of Cr5 steel |
LIU Xin-bin(劉新彬), WU Guang-liang(吳光亮), ZHOU Chao-yang(周超洋) |
3065 |
| Ferronickel preparation using Ni-Fe co-deposition process |
WANG Fei(王飛), LI Lei(李磊), QIU Shi-wei(邱士偉), WANG Hua(王華) |
3072 |
| Effects of MgO content and CaO/Al2O3 ratio on surface tension of calcium aluminate refining slag |
XU Ji-fang(許繼芳), ZHANG Jie-yu(張捷宇), CHEN Dong(陳棟), SHENG Min-qi(盛敏奇), WENG Wen-ping(翁文憑) |
3079 |
| Solvent extraction mechanism and precipitation stripping of bismuth (III) in hydrochloric acid medium by tributyl phosphate |
WANG Zhi-jian(王志堅), DING Feng-hua(丁風華), ZHAN Jing(湛菁), ZHANG Chuan-fu(張傳福) |
3085 |
| Preparation and photocatalytic performance of ZnO/ZnGa2O4 composite microspheres |
ZHANG Li(張麗), DAI Chao-hua(戴超華), ZHANG Xiu-xiu(張秀秀), LIU You-nian(劉又年), YAN Jian-hui(閻建輝) |
3092 |
| Catalytic cracking mechanisms of tar model compounds |
CHEN Bo(陳波), SHI Zhang-ming(時章明), JIANG Shao-jian(蔣紹堅), TIAN Hong(田紅) |
3100 |
| Effect of magnetic pulse pretreatment on grindability of a magnetite ore and its implication on magnetic separation |
YU Jian-wen(余建文), HAN Yue-xin(韓躍新), LI Yan-jun(李艷軍), GAO Peng(高鵬) |
3108 |
| UV-TiO2 photocatalytic disinfection and photoreactivation of pathogenic bacterium in municipal wastewater |
WANG Xi-feng(王西峰), HU Xiao-lian(胡曉蓮), GONG Xin(龔昕), BAN Yun-xiao(班云霄) |
3115 |
| Membrane behavior of bentonite-amended Fukakusa clay in K, Na and Ca solutions |
TANG Qiang(唐強), LIU Wei(劉維), WANG Heng-yu(王恒宇), CHENG Rong(程蓉), QIAN Yin-fei(錢寅飛) |
3122 |
| Mechanical Engineering, Control Science and Information Engineering |
| Semi-empirical modeling of volumetric efficiency in engines equipped with variable valve timing system |
Mostafa Ghajar, Amir Hasan KaKaee, Behrooz Mashadi |
3132 |
| Establishment and application of service mapping model for proactive remanufacturing impeller |
SONG Shou-xu(宋守許), TAI Ying-ying(邰瑩瑩), KE Qing-di(柯慶鏑) |
3143 |
| Parametric analysis of mixed lubrication characteristics in work zone of strip rolling |
WU Jian-qing(吳建清), LIANG Xiao-ping(梁小平), PAN Fu-sheng(潘復生) |
3153 |
| Efficiency analysis of trilateral-cycle power systems for waste heat recovery-to-power generation |
Habeeb A. AJIMOTOKAN |
3160 |
| Monte-Carlo based cascade control approach with focus on real overactuated space systems |
M. Shahi, A.H. Mazinan |
3171 |
| Role based access control design using Triadic concept analysis |
Ch. Aswani Kumar, S. Chandra Mouliswaran, LI Jin-hai, C. Chandrasekar |
3183 |
| Numerical modeling dynamic process of multi-feed microwave heating of industrial solution media |
YANG Biao(楊彪), SUN Jun(孫俊), LI Wei(李瑋), PENG Jin-hui(彭金輝), LI You-ling(李幼靈), LUO Hui-long(羅會龍), GUO Sheng-hui(郭勝惠), ZHANG Zhu-ming(張竹敏), SU He-zhou(蘇鶴州), SHI Ya-ming(史亞鳴) |
3192 |
| A fast method to evaluate water eutrophication |
YAN Hu-yong(嚴胡勇), WANG Guo-yin(王國胤), ZHANG Xue-rui(張學睿), DONG Jian-hua(董建華), SHAN Kun(閃錕), WU Di(吳迪), HUANG Yu(黃昱), ZHOU Bo-tian(周博天), SU Yu-ting(蘇宇婷) |
3204 |
| Low-cost cloud computing solution for geo-information processing |
GAO Pei-chao(高培超), LIU Zhao(劉釗), XIE Mei-hui(謝美慧), TIAN Kun(田琨) |
3217 |
| A robust multi-objective and multi-physics optimization of multi-physics behavior of microstructure |
Hamda Chagraoui, Mohamed Soula, Mohamed Guedri |
3225 |
| Machine-learning-aided precise prediction of deletions with next-generation sequencing |
GUAN Rui(管瑞), GAO Jing-yang(髙敬陽) |
3239 |
| NSGAII based multi-objective homing trajectory planning of parafoil system |
TAO Jin(陶金), SUN Qing-lin(孫青林), CHEN Zeng-qiang(陳增強), HE Ying-ping(賀應平) |
3248 |
| Geological, Civil, Energy and Traffic Engineering |
| Coupled effects of stress damage and drilling fluid on strength of hard brittle shale |
WANG Wei(汪偉), DENG Jin-gen(鄧金根), YU Bao-hua(蔚寶華), ZHENG Xiao-jin(鄭小錦), YAN Chuan-liang(閆傳梁), DENG Yue(鄧月) |
3256 |
| Mode of overlying rock roofing structure in large mining height coal face and analysis of support resistance |
WU Feng-feng(吳鋒鋒), LIU Chang-you(劉長友), YANG Jing-xuan(楊敬軒) |
3262 |
| Calculation of maximum surface settlement induced by EPB shield tunnelling and introducing most effective parameter |
Sayed Rahim Moeinossadat, Kaveh Ahangari, Kourosh Shahriar |
3273 |
| Nonlinear characteristics of induced spontaneous combustion process of sulfide ores |
PAN Wei(潘偉), WU Chao(吳超), LI Zi-jun(李孜軍), SHI Ying(石英), YANG Yue-ping(楊月平) |
3284 |
| Collapse mechanism of deep tunnels with three-centered arch cross section |
LI Yong-xin(李永鑫), YAO Cong(姚聰) |
3293 |
| Adaptive fuzzy integral sliding mode pressure control for cutter feeding system of trench cutter |
TIAN Qi-yan(田啟巖), WEI Jian-hua(魏建華), FANG Jin-hui(方錦輝), GUO Kai(國凱) |
3302 |
| Model test to investigate failure mechanism and loading characteristics of shallow-bias tunnels with small clear distance |
LEI Ming-feng(雷明鋒), LIN Da-yong(林大涌), YANG Wei-chao(楊偉超), SHI Cheng-hua(施成華), PENG Li-min(彭立敏), HUANG Juan(黃娟) |
3312 |
| Investigation of Barree-Conway non-Darcy flow effects on coalbed methane production |
YANG Lei(楊蕾), RUI Hong-xing(芮洪興), ZHAO Qing-li(趙慶利) |
3322 |
| Analysis of chamber effect on intermittent pulsation |
Tang Chan(唐嬋), Zhang Jing-zhou(張靖周), Tan Xiao-ming(譚曉茗), WANG Chun-hua(王春華) |
3332 |
| Numerical analysis on thermal regime of wide embankment in permafrost regions of Qinghai-Tibet Plateau |
MA Tao(馬濤), TANG Tao(湯濤), HUANG Xiao-ming(黃曉明), WANG Hao(汪浩) |
3346 |
| Sliding-mode control of path following for underactuated ships based on high gain observer |
QIN Zi-he(秦梓荷), LIN Zhuang(林壯), SUN Han-bing(孫寒冰), YANG Dong-mei(楊東梅) |
3356 |
