Materials, Metallurgy, Chemistry and Chemical Engineering |
Optimization of process parameters to maximize ultimate tensile strength of friction stir welded dissimilar aluminum alloys using response surface methodology |
R. Palanivel, P. Koshy Mathews, N.Murugan |
2929 |
Hot compressive deformation behavior and constitutive relationship of Al-Zn-Mg-Zr alloy with trace amounts of Sc |
LI Bo(李波), PAN Qing-lin(潘清林), LI Chen(李晨), ZHANG Zhi-ye(張志野), YIN Zhi-min(尹志民) |
2939 |
Effects of Eu2O3 doping on microstructural and electronic properties of ZnO-Bi2O3-based varistor ceramics prepared by high-energy ball milling |
DONG Yu-juan(董玉娟), CUI Feng-dan(崔鳳單), JIAO Lei(焦雷), XU Hong-xing(徐紅星), TANG Dong-mei(唐冬梅), WU Jie-ting(吳婕婷), YU Ren-hong(于仁紅), XU Dong(徐東) |
2947 |
Effect of Fe2O3/SiO2 ratio on maghemite-silica particulate nanocomposites |
ANG Bee Chin, YAACOB Iskandar Idris, NURDIN Irwan |
2954 |
Fluid flow characteristics of single inclined circular jet impingement for ultra-fast cooling |
WANG Bing-xing(王丙興), XIE Qian(謝謙), WANG Zhao-dong(王昭東), WANG Guo-dong(王國棟) |
2960 |
Novel technology on preparation of double-layered pellets for sulfur and arsenic-bearing gold concentrates |
YANG Yong-bin(楊永斌), CUI Li-na(崔麗娜), LI Xi-shan(李希山), LI Qian(李騫), JIANG Tao(姜濤), GE Jie(戈捷) |
2967 |
Protective effects of Rad23 protein on ultraviolet damage to HeLa cells |
LI Xiu-shan(李秀山), ZHANG Ji-hong(張繼紅), ZHAO Xiao-ying(趙小英), LIU Xuan-ming(劉選明) |
2974 |
Mechanical Engineering, Control Science and Information Engineering |
Two types of coaxial self-balancing robots |
GAO Xue-shan(高學山), DAI Fu-quan(戴福全), LI Chao-quan(李潮全) |
2981 |
A practical robust nonlinear controller for maglev levitation system |
LI Jin-hui(李金輝), LI Jie(李杰), Zhang Geng(張耿) |
2991 |
Reliability improvement in distribution systems employing an integrated voltage sag mitigation method using binary gravitational search algorithm |
Salman Nesrullah, Mohamed Azah, Shareef Hussain |
3002 |
Development of space end-effector with capabilities of misalignment tolerance and soft capture based on tendon-sheath transmission system |
FENG Fei(豐飛), LIU Yi-wei(劉伊威), LIU Hong(劉宏), CAI He-gao(蔡鶴皋) |
3015 |
Prestiction friction compensation in direct-drive mechatronics systems |
LI Zhi-qiang(黎志強), ZHOU Qing-kun(周擎坤), ZHANG Zhi-yong(張智永), ZHANG Lian-chao(張連超), FAN Da-peng(范大鵬) |
3031 |
Genetic algorithm tuned PI controller on PMSM simplified vector control |
WIBOWO Wahyu Kunto, JEONG Seok-kwon |
3042 |
Multi-rate tracking controller analysis and design for target tracking systems |
HONG Hua-jie(洪華杰), LI Zhi-qiang(黎志強), FAN Shi-xun(范世珣), ZHOU Qing-kun(周擎坤), FAN Da-peng(范大鵬) |
3049 |
An adaptive waveform-detection threshold joint optimization method for target tracking |
WANG Hong-qiang(王宏強), XIA Hong-en(夏洪恩), CHENG Yong-qiang(程永強), WANG Lu-lu(王璐璐) |
3057 |
Characteristics of seal shell body’s rubber ring with bionic dimpled surfaces of aerodynamic extinguishing cannon |
GU Yun-qing(谷云慶), ZHAO Gang(趙剛), LIU Hao(劉浩), ZHENG Jin-xing(鄭金興), RU Jing(汝晶), LIU Ming-ming(劉明明), A. R. Chatto, WANG Cheng-gang(王成剛) |
3065 |
Relaxation labeling for non-rigid point matching under neighbor preserving |
YAN Xing-wei(晏行偉), WANG Wei(王瑋), ZHAO Jian(趙鍵), HU Jie-min(胡杰民), ZHANG Jun(張軍), WAN Jian-wei(萬建偉) |
3077 |
A genetic Gaussian process regression model based on memetic algorithm |
ZHANG Le(張樂), LIU Zhong(劉忠), ZHANG Jian-qiang(張建強), REN Xiong-wei(任雄偉) |
3085 |
Dynamic characteristic analysis of whole machine tools based on Kriging model |
GAO Xiang-sheng(高相勝), ZHANG Yi-du(張以都), GAO Hao-dong(郜浩冬), ZHANG Hong-wei(張洪偉) |
3094 |
An iterative calibration method for nonlinear coefficients of marine triaxial accelerometers |
YANG Jie(楊杰), WU Wen-qi(吳文啟), WU Yuan-xin(武元新), LIAN Jun-xiang(練軍想) |
3103 |
Resolution performance analysis of cumulants-based rank reduction estimator in presence of unexpected modeling errors |
WANG Ding(王鼎), WU Ying(吳瑛) |
3116 |
Smooth cutting pattern generation technique for membrane structures using geodesic line on subplane and spline interpolation |
SHON Su-deok, LEE Seung-jae, LEE Kang-guk |
3131 |
Energy-constrained ferry route design for sparse wireless sensor networks |
WANG Yong(王勇), PENG Wei(彭偉), DOU Qiang(竇強), GONG Zheng-hu(龔正虎) |
3142 |
Local information enhanced LBP |
ZHANG Gang(張剛), SU Guang-da(蘇光大), CHEN Jian-sheng(陳健生), WANG Jing(王晶) |
3150 |
Parallel solving model for quantified boolean formula based on machine learning |
LI Tao(李濤), XIAO Nan-feng(肖南峰) |
3156 |
Simulation of thermal field induced by concave spherical transducer in multi-layer media |
DING Ya-jun(丁亞軍), QIAN Sheng-you(錢盛友), LIAO Zhi-yuan(廖志遠) |
3166 |
Human action recognition based on chaotic invariants |
XIA Li-ming(夏利民), HUANG Jin-xia(黃金霞), TAN Lun-zheng(譚論正) |
3171 |
Anisotropic fourth-order diffusion regularization for multiframe super-resolution reconstruction |
HUANG Shu-ying(黃淑英), YANG Yong(楊勇), WANG Guo-yu(王國宇) |
3180 |
Predication of plasma concentration of remifentanil based on Elman neural network |
TANG Jing-tian(湯井田), CAO Yang(曹揚), XIAO Jia-ying(肖嘉瑩), GUO Qu-lian(郭曲練) |
3187 |
Geological Engineering, Civil Engineering, Traffic and Transportation Engineering |
Prediction on contaminant migration in aquifer of fractured granite substrata of landfill |
WANG Yang(汪洋), ZHANG Ke-neng(張可能), CHEN Yong-gui(陳永貴), ZHOU Xing-zhi(周星志), JIN Fu-xi(金福喜) |
3193 |
Superposability of unsteady aerodynamic loads on bridge deck sections |
ZHANG Zhi-tian(張志田), GE Yao-jun(葛耀君), ZHANG Wei-feng(張偉峰) |
3202 |
Wind-induced responses of super-large cooling towers |
KE Shi-tang(柯世堂), GE Yao-jun(葛耀君), ZHAO Lin(趙林), CHEN Shao-lin(陳少林), Y. Tamura |
3216 |
Factors affecting accuracy of radial point interpolation meshfree method for 3-D solid mechanics |
PENG Chong(彭翀), YUAN Hui-na(袁會娜), ZHANG Bing-yin(張丙印), ZHANG Yan(張琰) |
3229 |
Fluid-solid coupling model based on endochronic damage for roller compacted concrete dam |
GU Chong-shi(顧沖時), WEI Bo-wen(魏博文), XU Zhen-kai(徐鎮凱), LIU Da-wen(劉大文) |
3247 |
Probabilistic analysis of geomembrane puncture from granular material under liquid pressure |
JIANG Xiao-zhen(姜曉楨), SHU Yi-ming(束一鳴), ZHU Jun-gao(朱俊高) |
3256 |
A new hybrid algorithm for global optimization and slope stability evaluation |
Taha Mohd Raihan, Khajehzadeh Mohammad, Eslami Mahdiyeh |
3265 |
Back analysis of general slope under earthquake forces using upper bound theorem |
SUN Zhi-bin(孫志彬), Liang qiao(梁橋) |
3274 |
Vacuum preloading combined electroosmotic strengthening of ultra-soft soil |
PENG Jie(彭劼), XIONG Xiong(熊雄), MAHFOUZ A H, SONG En-run(宋恩潤) |
3282 |
Scattering wave field around a cavity with circular cross-section embedded in saturated soil using boundary element method |
ZHANG Hong(張鴻), GAO Qian(高謙), XU Bin(徐斌) |
3296 |
Numerical and theoretical verification of modified cam-clay model and discussion on its problems |
DAI Zi-hang(戴自航), QIN Zhi-zhong(秦志忠) |
3305 |
Sensitive factors research for track-bridge interaction of Long-span X-style steel-box arch bridge on high-speed railway |
LIU Wen-shuo(劉文碩), DAI Gong-lian(戴公連), HE Xu-hui(何旭輝) |
3314 |
Two-echelon inventory model with service level constraint and controllable lead time sensitive to order quantity |
LI Guo(李果), GUAN Xu(關旭), LIU Meng-qi(劉夢麒), SHAN Mi-yuan(單汩源) |
3324 |
Critical safe distance design to improve driving safety based on vehicle-to-vehicle communications |
CHEN Chen(陳晨), Lü Ning(呂寧), LIU Lei(劉雷), PEI Qing-qi(裴慶祺), LI Xiao-ji(李曉記) |
3334 |