Content |
Preparation and characterization of poly(D,L-lactide) and
its porous biomaterials① |
ZHOU Zhong-cheng(周忠誠), RUAN Jian-ming(阮建明), HUANG Bai-yun(黃伯云),
LI Ya-jun(李亞軍), ZOU Jian-peng(鄒儉鵬), ZHANG Hai-bo(張海波) |
1 |
Structural characteristics of spherical Ni(OH)2and
its charge/discharge process mechanism① |
PENG Mei-xun(彭美勛), SHEN Xiang-qian(沈湘黔),
WANG Ling-seng(王零森), WEI Ya-hui(危亞輝) |
5 |
Fabrication of GaN films through reactive reconstruction of
magnetron sputtered ZnO/Ga2O3① |
GAO Hai-yong(高海永), ZHUANG Hui-zhao(莊惠照), XUE Chen-shan(薛成山),
DONG Zhi-hua(董志華), HE Jian-ting(何建廷), LIU Yi-an(劉亦安),
WU Yu-xin(吳玉新), TIAN De-heng(田德恒) |
9 |
Local segregation in Cu-In precursors and its
effects on microstructures of selenized CuInSe2thin films① |
FANG Ling(方 玲), ZHANG Gong(張 弓), ZHUANG Da-ming(莊大明),
ZHAO Ming(趙 明), WU Min-sheng(吳敏生) |
13 |
Optimization analysis on gap size of molding for Pb-GF composite wire① |
FANG Wen-bin(房文斌), SUN Hong-fei(孫宏飛), GENG Yao-hong(耿耀宏),
WANG Er-de(王爾德), HAN Fei(韓 飛) |
17 |
Influence of welding parameters on nitrogen content in
welding metal of 32Mn-7Cr-1Mo-0.3N austenitic steel① |
FU Rui-dong(付瑞東), QIU Liang(邱 亮), WANG Cun-yu(王存宇),
WANG Qing-feng(王青峰), ZHENG Yang-zeng(鄭煬曾) |
22 |
Characterization of EBPVD micro-layer composites and
simulation of its internal stress state① |
SHI Li-ping(史麗萍), HE Xiao-dong(赫曉東) |
27 |
Preparation of BN/SiO2ceramics by PIP method① |
WANG Jing(王 靜), WEN Guang-wu(溫廣武), MENG Qing-chang(孟慶昌) |
31 |
Influence of isothermal quenching of LAMC CrMnSi cast steel
on impact toughness① |
JIN Bao-shi(金寶士), HUANG Zhi-qiu(黃志求), SHEN Da-dong(沈大東) |
35 |
Magnetostrictive distortion in Pr0.15TbxDy0.85-xFe2
polycrystals by X-ray diffraction① |
MENG Fan-bin(孟凡斌), LI Yang-xian(李養賢), CHEN Gui-feng(陳貴鋒),
LIU He-yan(劉何燕), QU Jing-ping(曲靜萍), CHEN Jing-lan(陳京蘭 |
39 |
Microstructure and properties of novel polarization maintaining fiber |
LI Mei-cheng(李美成), LIU Li-hua(劉禮華), XUE Jian-jun(薛建軍),
XIAO Tian-peng(肖天鵬), LIANG Le-tian(梁樂天), ZHAO Lian-cheng(趙連 |
42 |
Solvent extraction of copper and zinc from
bioleaching solutions with LIX984 and D2EHPA① |
LAN Zhuo-yue(藍卓越), HU Yue-hua(胡岳華),LIU Jian-she(柳建設), WANG Jun(王 軍) |
45 |
Mild oxidation treatment of graphite anode for Li-ion batteries① |
GUO Hua-jun(郭華軍), LI Xin-hai(李新海), WANG Zhi-xing(王志興),
PENG Wen-jie(彭文杰), GUO Yong-xing(郭永興) |
50 |
Removal of organic matter from H2TaF7solution by adsorption① |
LI Qing-gang(李青剛), ZHOU Kang-gen(周康根), ZHANG Qi-xiu(張啟修) |
55 |
Low pressure synthesis of boron nitride with
(C2H5)2O·BF3 and Li3N precursor① |
WANG Shao-bo(王少波), XU Xiao-wei(徐曉偉), FAN Hui-li(范慧麗), LI Yu-ping(李玉萍) |
60 |
Synthesis and application of antimony pent(isooctyl thioglycollate)① |
LIU You-nian(劉又年), LI Hong-bing(李紅兵), SHU Wan-gen(舒萬艮), CHEN Qi-yuan(陳啟元) |
64 |
Preparation and characterization of poly(lithium acrylate-arcylonitrile)/
LiClO4-LiNO3-LiBr solid polymer electrolytes① |
PAN Chun-yue(潘春躍), YUAN Yun-lan(袁云蘭), CHEN Zhen-hua(陳振華),
XU Xian-hua(徐先華), ZHANG Jian(張 堅) |
68 |
Stability and structural dimension of access mechanized panel① |
LUO Yi-zhong(羅一忠), WU Ai-xiang(吳愛祥), WANG Hong-jiang(王洪江), LIU Xiang-ping(劉湘平) |
73 |
Mobility factors of cracked ore in vibrating-ore draw shafts① |
WU Ai-xiang(吳愛祥), JIANG Li-chun(姜立春), CHEN Jia-sheng(陳嘉生) |
78 |
Numerical simulation for sheet metal forming process of
16Mn blade of large concrete-mixer truck① |
WANG Jin-hong(王錦紅), XIA Wei(夏 偉), ZHOU Zhao-yao(周照耀),
CHEN Wei-ping(陳維平), YUN Jian-guo(鄖建國) |
83 |
Soft sensor for ratio of soda to aluminate based on
PCA-RBF multiple network① |
GUI Wei-hua(桂衛華), LI Yong-gang(李勇剛), WANG Ya-lin(王雅琳) |
88 |
Active set truncated-Newton algorithm for
simultaneous optimization of distillation column① |
LIANG Xi-ming(梁昔明) |
93 |
Two-stage numerical simulation for temperature profile
in furnace of tangentially fired pulverized coal boiler① |
ZHOU Nai-jun(周乃君), XU Qiong-hui(徐瓊輝), ZHOU Ping(周 萍) |
97 |
Catastrophe analysis on pillar instability considered mining effect① |
LI Jiang-teng(李江騰), CAO Ping(曹 平) |
102 |