| Materials Science and Engineering, Chemistry and Chemical Engineering |
| Deformation simulation of low-temperature high-speed extrusion for
6063 Al alloy |
WANG Meng-jun(王孟君), HE Zhao(何釗), WU Xing-xing(武星星),
LI Cai-wen(李彩文), LI Guang-yao(李光耀) |
881 |
| First-principle investigation on electronic structures and
elastic properties of Al-doped MoSi2 |
LIU Xiao-liang(劉小良), REN Yi(任意), XU Hui(徐慧), ZHAO Zhong-wei(趙中偉) |
888 |
Carbon spheres prepared via solvent-thermal reaction method and
their microstructures after high temperature treatment |
YIN Cai-liu(尹彩流), WEN Guo-fu(文國富), HUANG Qi-zhong(黃啟忠),
WANG Xiu-fei(王秀飛), HE Liang-ming(何良明) |
895 |
Effects of thickness and elastic modulus on stress condition of
fatigue-resistant coating under rolling contact |
PIAO Zhong-yu(樸鐘宇), XU Bin-shi(徐濱士), WANG Hai-dou(王海斗), PU Chun-huan(濮春歡) |
899 |
| Cooperative effect of surface alloying and laser texturing on
tribological performance of lubricated surfaces |
WAN Yi(萬軼), XIONG Dang-sheng(熊黨生), LI Jian-liang(李建亮)
|
906 |
Modeling of metadynamic recrystallization kinetics after
hot deformation of low-alloy steel Q345B |
MA Bo(馬博), PENG Yan(彭艷), LIU Yun-fei(劉云飛), JIA Bin(賈斌) |
911 |
| Effect of CaCO3 on hydration characteristics of C3A |
XIAO Jia(肖佳), GOU Cheng-fu(勾成福), JIN Yong-gang(金勇剛), WANG Yong-he(王永和) |
918 |
Wettability and surfactivity of sodium phosphate surfactants in
strong alkali solutions |
CHEN Sheng-hui(陳勝慧), DONG Jin-feng(董金鳳) |
924 |
| Effects of dispersant on performance of Ni-Zn batteries |
YANG Zhan-hong(楊占紅), LIAO Jian-ping(廖建平), WANG Sheng-wei(王升威),
WANG Su-qin(王素琴), HU Jun(胡俊) |
930 |
| A new multifunctional polymer: Synthesis and characterization of mPEG-b-PAA-grafted chitosan copolymer |
LIU Cheng-bin(劉承斌), WANG Xiao-jian(王小見), LIU Rong-hua(劉榮華),
WU Yu-lin(吳育林), LUO Sheng-lian(羅勝聯) |
936 |
Light energy conversion device for photocatalyst 2.0%WO3-TiO2 with
oxygen vacancies for water splitting |
TONG Hai-xia(童海霞), CHEN Qi-yuan(陳啟元), HU Hui-ping(胡慧萍), YIN Zhou-lan(尹周瀾) |
943 |
| Mine Engineering, Metallurgical Engineering and Environmental Engineering |
| Seismological method for prediction of areal rockbursts in deep mine with seismic source mechanism and unstable failure theory |
TANG Li-zhong(唐禮忠), XIA K W |
947 |
| Comprehensive utilization of kaolin ore accompanying muscovite |
YU Lian-xiang(喻連香), WANG Hai-dong(王海東), QIU Guan-zhou(邱冠周), LIANG Dong-yun(梁冬云) |
954 |
| Aerobic biodegradation of diethyl phthalate by Acinetobacter sp. JDC-16 isolated from river sludge |
LIANG Ren-xing(梁任星), WU Xue-ling(吳學玲), WANG Xing-na(王興娜),
DAI Qin-yun(代沁蕓), WANG Yang-yang(王洋洋) |
959 |
| Zinc leaching from electric arc furnace dust in alkaline medium |
LI Hong-xu(李宏煦), WANG Yang(王洋), CANG Da-qiang(蒼大強) |
967 |
| Adsorption characteristics of carbon tetrachloride from aqueous solution onto polyacrylonitrile-based activated carbon fiber |
LIU Wen-xia(劉文霞), GUAN Bao-hong(官寶紅), YU Jie(于潔) |
972 |
| Combination of chlorine and magnetic ion exchange resin for
drinking water treatment of algae |
HAN Zhi-gang(韓志剛), CHEN Wei(陳衛), LI Lei(李磊), CAO Zhe(曹喆) |
979 |
Catalytic hydrolysis of carbonyl sulfide over
modified coal-based activated carbons by loading metal |
YI Hong-hong(易紅宏), YU Li-li(于麗麗), TANG Xiao-long (唐曉龍),
NING Ping(寧平), LI Hua(李華), WANG Hong-yan(王紅妍), YANG Li-na(楊麗娜) |
985 |
| Mechanical Engineering, Control Science and Engineering |
| Node scattering manipulation based on trajectory model in
wireless sensor network |
PEI Zhi-qiang(裴智強), XU Chang-qing(徐昌慶), TENG Jin(藤勁) |
991 |
| Improved model to solve influence coefficients of work roll deflection |
ZHAO Tie-yong(趙鐵勇), XIAO Hong(肖宏) |
1000 |
A new analytical algorithm for computing probability distribution of
project completion time |
HOU Zhen-ting(侯振挺) , ZHANG Xuan(張玄), KONG Xiang-xing(孔祥星) |
1006 |
| Design of logic process based low-power 512-bit EEPROM for
UHF RFID tag chip |
JIN Li-yan(金麗妍), LEE J H, HA P B, KIM Y H |
1011 |
| Method of triangular mesh modeling in numerical control machining simulation |
MA Zhi-yan(馬志艷), CHEN You-ping(陳幼平), LI Jian-jun(李建軍), ZHAO Yao-jing(趙遙勁) |
1021 |
| Adaptive template filter method for image processing based on
immune genetic algorithm |
TAN Guan-zheng(譚冠政), WU Jian-hua(吳建華), FAN Bi-shuang(范必雙), JIANG Bin(江斌) |
1028 |
| A novel PID controller tuning method based on optimization technique |
LIANG Xi-ming(梁昔明), LI Shan-chun(李山春), HASSAN A B |
1036 |
| Unilateral self-locking mechanism for inchworm in-pipe robot |
QIAO Jin-wei(喬晉崴), SHANG Jian-zhong(尚建忠), CHEN Xun(陳循),
LUO Zi-rong(羅自榮), ZHANG Xiang-po(張詳坡) |
1043 |
| Clustering-driven watershed adaptive segmentation of bubble image |
ZHOU Kai-jun(周開軍), YANG Chun-hua(陽春華), GUI Wei-hua(桂衛華), XU Can-hui(許燦輝) |
1049 |
Linear manifold clustering for high dimensional data based on
line manifold searching and fusing |
LI Gang-guo(黎剛果), WANG Zheng-zhi(王正志), WANG Xiao-min(王曉敏),
NI Qing-shan(倪青山), QIANG Bo(強波) |
1058 |
| Geological Engineering and Civil Engineering |
| Centrifuge modeling of dynamic behavior of
pile-reinforced slopes during earthquakes |
YU Yu-zhen(于玉貞), DENG Li-jun(鄧麗軍), SUN Xun(孫遜), LÜ He(呂禾) |
1070 |
| Improved parameter selection method for mesoscopic numerical simulation test of direct tensile failure of rock and concrete |
LIU Zhi-guang(劉智光), CHEN Jian-yun(陳健云), BAI Wei-feng(白衛峰), XU Qiang(徐強) |
1079 |
| Simplified design of rock cavern concrete lining to resist shock loading |
ZHAO P J, LOK T S, YIN Zhi-qiang(殷志強), ZHOU Zi-long(周子龍) |
1087 |
Strength and deformation behaviour of
coarse-grained soil by true triaxial tests |
SHI Wei-cheng(施維成), ZHU Jun-gao(朱俊高), CHIU Chung-fai(趙仲輝), LIU Han-long(劉漢龍) |
1095 |
| Post-fire cyclic behavior of reinforced concrete shear walls |
LIU Gui-rong(劉桂榮), SONG Yu-pu(宋玉普), QU Fu-lai(曲福來) |
1103 |
| Prediction of vibrations from underground trains on Beijing metro line 15 |
DING De-yun(丁德云), LIU Wei-ning(劉維寧), GUPTA S, LOMBAERT G, DEGRANDE G |
1109 |
| Effect of heterogeneity on mechanical and
acoustic emission characteristics of rock specimen |
LI Shu-cai(李術才), LI Guo-ying(李國瑩) |
1119 |
