Materials Science and Engineering, Chemistry and Chemical Engineering |
Hot-compression behavior of Al alloy 5182 |
TANG Jian-guo(唐建國), HUANG Xing-xing(黃星星), ZHANG Xin-ming(張新明) |
2073 |
Underwater friction stir welding of ultrafine grained 2017 aluminum alloy |
WANG Kuai-she(王快社), WU Jia-lei(武佳蕾), WANG Wen(王文),
ZHOU Long-hai(周龍海), LIN Zhao-xia(林兆霞), KONG Liang(孔亮) |
2081 |
Effect of indium addition on corrosion of AP65 magnesium alloy |
JIN He-xi(金和喜), WANG Ri-chu(王日初), PENG Chao-qun(彭超群), SHI Kai(石凱), FENG Yan(馮艷) |
2086 |
Comparative characteristics of yttrium oxide and yttrium nitric acid doping in ZnO varistor ceramics |
XU Dong(徐東), TANG Dong-mei(唐冬梅), JIAO Lei(焦雷),
YUAN Hong-ming(袁宏明), ZHAO Guo-ping(趙國平), CHENG Xiao-nong(程 |
2094 |
Sintering, crystallization and dielectric properties of CaO-B2O3-SiO2 system glass ceramics |
DAI Bin(戴斌), ZHU Hai-kui(朱?), ZHOU Hong-qing(周洪慶),
XU Gui-jun(許貴軍), YUE Zhen-xing(岳振星) |
2101 |
Modeling transmittance through submicron silver slit arrays |
WANG Ai-hua(王愛華), CAI Jiu-ju(蔡九菊), CHEN Yu-bin(陳玉彬) |
2107 |
Stress distributions on crown-luting cement-substrate system with finite element method |
S. SEN, M. S. GULER, C. GULER |
2115 |
Effect of OH- on morphology of Cu2O particles prepared through reduction of Cu(II) by glucose |
WANG Yue-jun(王岳俊), ZHOU Kang-gen(周康根) |
2125 |
Microwave radiation one-pot synthesis of chloropropyl-functionalized mesoporous MCM-41 |
XU Yan-qin(徐彥芹), CAO Yuan(曹淵), XIA Zhi-ning(夏之寧) |
2130 |
Cloud-point extraction and preconcentration of bisphenol A from water samples |
TAN Zhi-jian(譚志堅), LI Fen-fang(李芬芳) |
2136 |
Mechanical Engineering, Control Science and Information Engineering |
Vision-based behavior prediction of ball carrier in basketball matches |
XIA Li-min(夏利民), WANG Qian(王千), WU Lian-shi(吳聯世) |
2142 |
Electromagnetic analysis and design of in-wheel motor of micro-electric vehicle based on Maxwell |
CHEN Qi-ping(陳齊平), SHU Hong-yu(舒紅宇), REN Kai(任凱),
ZHUANG Shen(莊深), XIE An-yuan(謝安源) |
2152 |
A novel robust adaptive controller for EAF electrode regulator system based on approximate model method |
LI Lei(李磊), MAO Zhi-zhong(毛志忠) |
2158 |
Almost pure TM or TE component far field in vector cosine-Gaussian beams |
ZHU Kai-cheng(朱開成), YU Yan(余燕), TANG Hui-qin(唐慧琴) |
2167 |
Stress distribution and fatigue life of built-up sleeved backup roll |
ZHU Zhong-ying(朱忠英), SUN Deng-yue(孫登月), XU Shi-ming(許石民) |
2173 |
Acid-pickling plates and strips speed control system by microwave heating based on self-adaptive fuzzy PID algorithm |
YANG Biao(楊彪), PENG Jin-hui(彭金輝), GUO Sheng-hui(郭勝惠),
ZHANG Shi-min(張世敏), LI Wei(李瑋), HE Tao(何濤)
2179 |
|
A QoS-aware vertical handoff algorithm based on predictive network information |
GUO Yun-song(郭云松), TAN Guan-zheng(譚冠政), A. S. M. LIBDA, MA Li-qiang(馬麗強) |
2187 |
QoS-oriented service composition based on mapping relation tree |
ZHANG Ying(張英), LIU Xiao-ming(劉曉明), WANG Zhi-xue(王智學), CHEN Li(陳立) |
2194 |
Understanding pollution dynamics in large-scale peer-to-peer IPTV system |
WANG Hai-zhou(王海舟), CHEN Xing-shu(陳興蜀), WANG Wen-xian(王文賢), HAO Zheng-hong(郝正鴻) |
2203 |
A novel internet traffic identification approach using wavelet packet decomposition and neural network |
TAN Jun(譚駿), CHEN Xing-shu(陳興蜀), DU Min(杜敏), ZHU Kai(朱鍇) |
2218 |
Near-duplicate document detection with improved similarity measurement |
YUAN Xin-pan(袁鑫攀), LONG Jun(龍軍), ZHANG Zu-ping(張祖平), GUI Wei-hua(桂衛華) |
2231 |
Vibration-based feature extraction of determining dynamic characteristic for engine block low vibration design |
DU Xian-feng(杜憲峰), LI Zhi-jun(李志軍), BI Feng-rong(畢鳳榮),
ZHANG Jun-hong(張俊紅), WANG Xia(王霞), SHAO Kang(邵康) |
2238 |
Global optimization by small-world optimization algorithm based on social relationship network |
LI Jin-hang(李晉航), SHAO Xin-yu(邵新宇), LONG Yuan-ming(龍淵銘),
ZHU Hai-ping(朱海平), B. R. Schlessman |
2247 |
Aware conflict detection of non-uniform memory access system and prevention for transactional memory |
WANG Rui-bo(王睿伯), LU Kai(盧凱), LU Xi-cheng(盧錫城) |
2266 |
Environmental Engineering and Mine Engineering |
Characterization and technology of fast reducing roasting for fine iron materials |
LUO Li-qun(羅立群), HUANG Hong(黃紅), YU Yong-fu(余永富) |
2272 |
Effects of soil and water conservation and its interactions with soil properties on soil productivity |
GUO Wang(郭旺), LI Zhong-wu(李忠武), SHEN Wei-ping(申衛平), WANG Xiao-yan(王曉燕),
ZENG Guang-ming(曾光明), CHEN Xiao-lin( |
2279 |
Characteristics of humin fractions associated with inorganic minerals obtained by NaOH, and NaOH assisted with anthraquinone extraction procedures |
HAN Gui-hong(韓桂洪), JIANG Tao(姜濤), HUANG Yan-fang(黃艷芳),
ZHANG Yuan-bo(張元波), LI Guang-hui(李光輝) |
2286 |
Action rules of H2 and CO in gas-based direct reduction of iron ore pellets |
YI Ling-yun(易凌云), HUANG Zhu-cheng(黃柱成), PENG Hu(彭虎), JIANG Tao(姜濤) |
2291 |
Passive seismic velocity tomography on longwall mining panel based on simultaneous iterative reconstructive technique (SIRT) |
N. Hosseini, K. Oraee, K. Shahriar, K. Goshtasbi |
2297 |
Separation of sulfide lead-zinc-silver ore under low alkalinity condition |
SUN Wei(孫偉), SU Jian-fang(蘇建芳), ZHANG Gang(張剛), HU Yue-hua(胡岳華) |
2307 |
Civil Engineering, Traffic and Transportation Engineering |
Rheological catastrophic model for soft clays |
MA Bo-ning(馬伯寧), XIE Xin-yu(謝新宇), LIU Kai-fu(劉開富) |
2316 |
Low secondary compressibility and shear strength of Shanghai Clay |
LI Qing(李青), C. W. W. NG(吳宏偉), LIU Guo-bin(劉國彬) |
2323 |
FEM analyses for influences of pressure solution on thermo-hydro-mechanical coupling in porous rock mass |
ZHANG Yu-jun(張玉軍), YANG Chao-shuai(楊朝帥) |
2333 |
Railway tunnel concrete lining damaged by formation of gypsum,thaumasite and sulfate crystallization products in southwest of China |
MA Kun-lin(馬昆林), LONG Guang-cheng(龍廣成), XIE You-jun(謝友均) |
2340 |
Longitudinal forces of continuously welded track on high-speed railway cable-stayed bridge considering impact of adjacent bridges |
DAI Gong-lian(戴公連), YAN Bin(閆斌) |
2348 |
RandWPSO-LSSVM optimization feedback method for large underground cavern and its engineering applications |
NIE Wei-ping(聶衛平), XU Wei-ya(徐衛亞), LIU Xing-ning(劉興寧) |
2354 |
Boussinesq equation-based model for flow in drainage layer of highway |
DAN Han-cheng(但漢成), LUO Su-ping(羅蘇平), LI Liang(李亮), ZHAO Lian-heng(趙煉恒) |
2365 |
Using acoustic technique to detect leakage in city gas pipelines |
CHEN Zhi-gang(陳志剛), LIAN Xiang-jiao(連香姣), HE Liang(赫亮) |
2373 |
Pressure from surrounding rock of three shallow tunnels with large section and small spacing |
YANG Xiao-li(楊小禮), JIN Qi-yun(金啟云), MA Jun-qiu(馬軍秋) |
2380 |
Cavity noise sensitivity analysis of tire contour design factors and application of contour optimization methodology |
KIM Seong-rae, SUNG Ki-deug, LEE Dong-woo, HUH Sun-chul |
2386 |
Cost-benefit timing for applying slurry seal on actual roadway tests in China |
ZHI Xi-lan(支喜蘭), WANG Wei-na(王威娜), TSAI Yi-chang(蔡宜長) |
2394 |